- Is it OK to coil coaxial cable?
- Are CB radios making a comeback?
- Does a TV splitter weaken the signal?
- Does coax cable degrade over time?
- How do I fix high SWR?
- How can I increase the range of my CB radio?
- Can you use TV coax for CB?
- How do you match a 75 ohm to a 50 ohm?
- What is the most powerful CB radio on the market?
- Can I use 75 ohm coax for CB?
- How can I improve my CB reception?
- How far will a 4 watt CB transmit?
- Can I use 75 ohm cable instead 50?
- Does coaxial cable length affect Internet speed?
- How far will a CB radio reach?
- What is the best coax cable for CB?
- Does a CB antenna need to be grounded?
- Is 1.5 SWR good?
- What is 75 ohm coax used for?
- What does 75 ohm coaxial cable mean?
- Does coax length affect SWR?
- Does CB antenna length matter?
- What SWR is too high?
- Can I use 50 ohm coax for TV?
- What does a very high SWR reading mean?
- How tall should my CB antenna be?
- What is the difference between 50 Ohm and 75 Ohm?
Is it OK to coil coaxial cable?
It is recommended that you use as little coaxial cable as you can.
Less is more with coaxial cables.
Also do not coil the coaxial cable as this can cause signal loss.
Instead let the cord lay uncoiled if at all possible..
Are CB radios making a comeback?
Many thought citizens band radios would disappear after the 1970s, along with pet rocks and disco. But not only are they still around, they are making a comeback. CB radio sales have increased steadily during the last three years, a trend not seen since the 1970s.
Does a TV splitter weaken the signal?
A cable splitter WILL result in a degradation of the signal, even if the other ports are unused. One thing you can do is to add terminator caps to each unused port. They are supposed to reduce the degradation. Note that cheaper cable splitters will actually have a different amount of signal loss for each port.
Does coax cable degrade over time?
Yes. Over time, a coaxial cable will degrade and need to be replaced in order to maintain the integrity of the signal.
How do I fix high SWR?
If your antenna is mounted down low on the vehicle, like on the bumper or behind a pickup truck’s cab, the signal can bounce back to the antenna, causing a high SWR. To alleviate this, keep at least the top 12 inches of the antenna above the roof line, and position the antenna as high as possible on the vehicle.
How can I increase the range of my CB radio?
How to Increase the Receiving Range on a CB RadioInstall an antenna specifically manufactured for use with CB radios. … Place your antenna as high as possible, in a place where radio signals can hit it from 360 degrees. … Adjust the squelch on your radio so that it blocks out static, but is not maxed out.More items…
Can you use TV coax for CB?
The cable TV coax its self won’t work as an antenna. It also won’t work well for a feed line to a CB antenna as it is 75ohm cable and CB’s are designed for 50ohm feed line and antenna. Of course you could connect it to the radio, you might hear something, probably not much. Just don’t try to transmit.
How do you match a 75 ohm to a 50 ohm?
So you have an approx 75 ohm impedance antenna and you want to get the best match you can. Take the wavelength of the frequency, multiply it by the velocity factor of your 75 ohm matching coax and multiply again by 0.0815. For example.
What is the most powerful CB radio on the market?
Most Powerful CB Radio Reviews 2020 – Best SSB CB RadiosUniden BEARCAT 980 40- Channel SSB CB Radio – (Most Powerful CB Radio)Galaxy DX-959B Mobile CB Radio – (Premium Pick)President Electronics MC KINLEY USA Hm AM/SSB Transceiver CB Radio.Galaxy-DX-949 40 Channel AM/SSB Mobile CB Radio.President Electronics BILL CB Radio.More items…
Can I use 75 ohm coax for CB?
RG-59 and RG-6 are 75 Ohm coaxial cables designed for cable television applications, they tend to have wide frequency response and low line loss. … You can use these cables with a 50 Ohm amateur radio antenna system, but because of the impedance mismatch, your SWR will be a little higher.
How can I improve my CB reception?
There are several procedures for ensuring maximum output.TUNE THE RADIO. A CB radio is only as good as the coax and antenna connected to it. … USE CB-SPECIFIC ANTENNAS. … ESTABLISH A GROUND PLANE. … CHECK THE VSWR. … ELIMINATE RESISTANCE.
How far will a 4 watt CB transmit?
Car, Boat, & Other Radios (Mobile & Fixed-Mount)Average Range Guidelines *WattageFlat Open Terrain (miles)Urban Areas (miles)4 watts (UHF)4 – 61½ – 35 watts (VHF)4½ – 61½ – 212 watt CB SSB (HF)8 – 153 – 55 more rows
Can I use 75 ohm cable instead 50?
3 Answers. Sure, you can use 75 ohm coax instead of 50 ohm. In some cases (such as feeding a dipole), 75 ohm coax may be a better match to the load than 50 ohm. … A 75 ohm load on a transmitter designed for a 50 ohm load is only a 1.5:1 SWR, which isn’t that bad.
Does coaxial cable length affect Internet speed?
Unfortunately, in most cases, coaxial cables fall short in terms of data speed. Some internet service providers are able to get up to 1 Gbps (1,000 Mbps), but it’s not too common. The coaxial cable that runs a connection into your home might be shared, too.
How far will a CB radio reach?
CB radios have a range of about 3 miles (4.8 km) to 20 miles (32 km) depending on terrain, for line of sight communication; however, various radio propagation conditions may intermittently allow communication over much greater distances.
What is the best coax cable for CB?
RG-8X (Premium Coax) If you’ll be using your coax in heavy-duty conditions and want something that’s more likely to hold up to abuse, we recommend going with RG-8X coax. For a great heavy-duty choice, consider this 18′ PL-259 RG8X CB coax cable.
Does a CB antenna need to be grounded?
Ground Your Antenna Mount If you’re using a standard CB antenna (i.e., anything except a no ground plane, or NGP, kit), you’ll need to make sure your antenna mount is solidly grounded to the vehicle’s chassis. A bad ground will result in an un-tunable antenna and sky-high SWR levels.
Is 1.5 SWR good?
SWR RANGE EXPLANATIONS. SWR 1.0-1.5: The ideal range! If your SWR is under 1.5, you’re in great shape. If you’re at 1.5 and really, really want to drop down to closer to 1 it’s likely possible to do with addition tuning, different equipment or a different mounting location.
What is 75 ohm coax used for?
Cables with 75 Ohm are mostly used for video signals, while 50 Ohm cables tend to be used for data and wireless communications. In coaxial cables, Ohm refers to the impedance, which is the measure of resistance in the cable to the flow of electrical energy.
What does 75 ohm coaxial cable mean?
50 and 75 Ohm values refer to the impedance of the coaxial cable. Impedance is a measure of resistance, in the cable, to the flow of electrical energy. … In the case of 50 Ohm cable, it is a data signal that is for the most part being transmitted. Simply put, 75 Ohm is for pictures and 50 Ohm is for information.
Does coax length affect SWR?
Many antennas have a SWR of just over a perfect match like a SWR of 1 to 1.2. This is measured at the antenna itself. With a length of coax the SWR will now show a SWR of say 1 to 1.0 , because of the loss in the coax. And so will the bandwidth change a little.
Does CB antenna length matter?
Yes, taller/longer is better for range of distance when it comes to an antenna and the optimal antenna length is 1/4 wavelength. That translates to 102 inches (8.5 feet), too tall to be practical for most mobile applications. So, antenna designers have devised solutions such as coils.
What SWR is too high?
For instance a SWR too high (over 3:1) all over the band can be an indication of a bad part or junction, poor ground or poor location. An SWR too low over the whole band (1:1 for all 40 channels) can indicate a low efficiency antenna or lossy component. Safe operation of your CB should be with an SWR of 2:1 or less.
Can I use 50 ohm coax for TV?
A good rule of thumb is that any device that functions as a transmitter or transceiver tends to use 50 Ohm Coaxial Cable. This includes devices such as CB/Ham Radios, Broadcast Radio/TV Transmitters, Wi-Fi and Cellular Phone Repeaters and 2-Way Radios (Walkie Talkies). … Our next most popular is RG-174 Coaxial Cable.
What does a very high SWR reading mean?
What does a very high SWR reading mean? The transmitter is putting out more power than normal, showing that it is about to go bad. The antenna is the wrong length, or there may be an open or shorted connection somewhere in the feed line. There is a large amount of solar radiation, which means very poor radio conditions.
How tall should my CB antenna be?
Generally, the higher the antenna is above ground, the better it will perform. Good practice is to install your vertical antenna about 5 to 10 feet above the roof line and away from power lines and obstructions. Remember that the FCC limits your antenna height to 60 feet.
What is the difference between 50 Ohm and 75 Ohm?
Especially when it comes to 50 Ohm vs 75 Ohm coax cables. In short, cables are measured by impedance, how much resistance there is to the flow of electrical energy. The smaller the Ohm, the better the performance. So a 50 Ohm cable provides much better results than a 75 Ohm cable.