Question: Which Wire Is Hot If Both Are Black?

Why do I have 2 black wires and 2 white wires?

If there is power in both the up and down position of your light switch, than that is the hot power.

If the light was fed power first than here is how you connect the wires.

Take your black (hot all the time wire) and marrett it onto the white of the opposite cable (that brings hot power down to your switch)..

What happens if you wire a light backwards?

The fixture still works if you reverse the wires, but the socket sleeve will be hot, and anyone who touches it while changing a bulb can get a shock. When wired correctly, the socket sleeve is neutral and only the small metal tab at the base of the socket is hot.

What if my light switch has no ground wire?

Going without a ground wire If the light switch has a screw for a bare ground wire but your electrical box doesn’t have one, you’re OK just leaving that screw empty and connecting your other wires to the hot screws. … If the box isn’t grounded, the switch will still work.

Which wire is hot when both are same color?

In most modern fixtures the neutral wire will be white and the hot wire is red or black. In some types of fixtures, both wires will be the same color. In this case, the neutral wire is always identified by some means.

Why are there 2 black wires on light switch?

The bare or green-wrapped ground wires serve as a backup to divert the power safely away in case of an electrical fault. In most cases, two black wires will be attached to the switch’s two terminal screws.

What if I have two black wires?

Black means hot, white signifies neutral, and green indicates ground. However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.

Is black positive or negative?

Step 3: Identify the jumper cables: Red is for the positive charge, black for the negative. The thicker the cables, the better the jump.

Is black wire hot?

Black, Red and Blue are used for hot wires and White is used as the neutral wire in a 120/208 V circuit. Brown, Orange and Yellow are used as hot wires and gray is used as the neutral wire in a 277/480 V. For grounding, regardless of the voltage, Green (or a bare wire) is used.

How do you know which wire is black?

Tip #1: An easy way to identify the wires in your wall box is by looking at the color. Tip #2: The Load wire is usually coming from the top of the box. The Line wire is usually coming from the bottom of the box. Tip #3: Before removing the switch, test each wire with a voltage tester.

What happens if live and neutral are reversed?

If the switch is put in the neutral line (like in your house) the switch and fuse comes in neutral line. In the switch OFF position the entire appliance will have 220V, touching any part will give you deadly shock. As per the rules, if live and neutral are reversed, Electricity board will not give power to your house.

Which wire is positive when both are black?

If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive. Look in the owner manual to determine which wires are negative in a car.

How do I know which wire is hot and neutral?

The Neutral Wire Is the One With the Markings The wire with the ribbing or stripe is the neutral wire, and the other one is hot. If you don’t see any markings on the wires, and the plug has two prongs of equal size, the cord is not polarized.

What happens if you mix up hot and neutral wires?

This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair. … This wire is commonly referred to as the neutral wire, and it should always be white.

Why are both black and white wires hot?

like the title says both wires (black and white get or turn hot). To answer your question, Yes, that is correct. The reason you are getting 120 volts when the fan/light is on is because the voltage is feeding trough the motor or the light bulb (or both).